Subtask 21-26-43-210-055 E. Do an inspection of the component interface and/or the adjacent area. 4. Procedure _________ (Ref. Fig. 401/TASK 21-26-43-991-006) **ON A/C 001-001, Subtask 21-26-43-420-055 A. Install the filter assembly. (1) Remove the blanking plugs from the disconnected line ends. (2) Install the filter body (4) with a new seal (11) on the blowing duct (6). (3) Install the screws (2) and the nuts (5). Do not fully tighten at this time. (4) Install the screws (10) and the nuts (7) with the equipped flange (12) and tighten. (5) Tighten the screws (2). (6) Install the drain hose (8). (7) Install the clamp (9) and tighten. (8) Install the flexible sleeve (14). (9) Install and tighten the clamps (1). ____ NOTE : Use the clamps (1) kept during the removal procedure. (10) Make sure that the attachments (3) are correctly tightened. (11) Release each of the four fasteners, open the door and install the filter (Ref. TASK 21-26-43-600-002). (12) Install the demister filter (Ref. TASK 21-26-43-600-001).
R
EFF : CES
001-049, 051-099, 101-105,
21-26-43 May 01/05 Page 408 Config-1
飞行翻译公司 www.aviation.cn 本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 12_部分3.pdf
R
EFF : CES
001-049, 051-099, 101-105,
21-26-43 May 01/05 Page 408 Config-1
飞行翻译公司 www.aviation.cn 本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 12_部分3.pdf
自定义标签： 
