R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
(a) Apply a small quantity of: - COMMON GREASE (Material No. 04-007) or - LUBRICANTS (Material No. 06-007) to the new packing (12) . ____ NOTE : The material 04-007 is a molybdenum disulfide powder. Before you can apply it you must first make it into a paste. To do this you must mix the powder with pure water or white spirit. ____ NOTE : The material 06-007 is applied dry. (5) Put the sleeve (14) on the air-cycle machine outlet (11). (6) Put the packings (12) in position on the pipe assembly (9) and on the air-cycle machine outlet (11). (7) Put the new seal (5) (5) in position in the sleeve (4) (Ref. TASK 2026-00-910-002) . (8) Put the pipe assembly (9) in position in the sleeve (4). ____ NOTE : Turn the pipe assembly (9) when you install it. This will help to prevent damage to the seal (5). (9) Move the sleeve (14) in position over the packings (12). ____ NOTE : Make sure that the sleeve (14) covers the flanges on the air-cycle machine outlet (11) and the pipe assembly (9). (10) Put the half-clamps (10) in position and install the clamp (13). ____ NOTE : Do not fully tighten at this time. (11) Apply a small quantity of COMMON GREASE (Material No. 04-012) to the contact faces of the retaining cables (3). (12) Make sure that the pipe assembly (9) is correctly aligned and put the retaining cables (3) in position. (13) Install the new washers (2) and the new nuts (1). ____ NOTE : Hold the hexagon part of the retaining cables (3) to prevent twisting of the cables when you install the nuts (1).
R
EFF : CES
401-499,
21-52-23
Page 421 Aug 01/05
飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 12_部分6.pdf
(a) Apply a small quantity of: - COMMON GREASE (Material No. 04-007) or - LUBRICANTS (Material No. 06-007) to the new packing (12) . ____ NOTE : The material 04-007 is a molybdenum disulfide powder. Before you can apply it you must first make it into a paste. To do this you must mix the powder with pure water or white spirit. ____ NOTE : The material 06-007 is applied dry. (5) Put the sleeve (14) on the air-cycle machine outlet (11). (6) Put the packings (12) in position on the pipe assembly (9) and on the air-cycle machine outlet (11). (7) Put the new seal (5) (5) in position in the sleeve (4) (Ref. TASK 2026-00-910-002) . (8) Put the pipe assembly (9) in position in the sleeve (4). ____ NOTE : Turn the pipe assembly (9) when you install it. This will help to prevent damage to the seal (5). (9) Move the sleeve (14) in position over the packings (12). ____ NOTE : Make sure that the sleeve (14) covers the flanges on the air-cycle machine outlet (11) and the pipe assembly (9). (10) Put the half-clamps (10) in position and install the clamp (13). ____ NOTE : Do not fully tighten at this time. (11) Apply a small quantity of COMMON GREASE (Material No. 04-012) to the contact faces of the retaining cables (3). (12) Make sure that the pipe assembly (9) is correctly aligned and put the retaining cables (3) in position. (13) Install the new washers (2) and the new nuts (1). ____ NOTE : Hold the hexagon part of the retaining cables (3) to prevent twisting of the cables when you install the nuts (1).
R
EFF : CES
401-499,
21-52-23
Page 421 Aug 01/05
飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 12_部分6.pdf
自定义标签： 
