A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 18_部分14.pdf350页

R R R R R R R R

(2) If the APPU/FPU angles are not in the specified limit: (a) Disconnect the torque shaft outboard of the actuator (Ref. TASK 27-84-48-000-001). (b) Turn the torque shaft in the applicable direction until the APPU and the FPU angles (deg) are in the specified limit. ____ NOTE : A turn of the torque shaft by one spline is equal to 0.11 deg. of the PPU angle. (c) Connect the torque shaft outboard of the actuator (Ref. TASK 2784-48-400-001). Subtask 27-84-48-710-050 H. Test (1) Do the operational test of the slat power-transmission system (Ref. TASK 27-84-00-710-001). 5. Close-up ________ Subtask 27-84-48-942-050 A. Removal of Equipment (1) Make sure that the work area is clean and clear of tool(s) and other items. (2) Remove the safety barriers. (3) Remove the warning notice(s). (4) Remove the access platform(s). (5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

EFF : CES

ALL

27-84-48

Page 417 Feb 01/03


飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 18_部分14.pdf