A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 19_部分2.pdf350页

C. Referenced Information ------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------28-00-00-991-125 3. Job Set-up __________ Subtask 28-00-00-160-051 R A. Cleaning _______ CAUTION : DO NOT TRY TO TURN THE DRIVE OF THE ACTUATOR BECAUSE YOU WILL CAUSE DAMAGE. (1) Use a MISCELLANEOUS (Material No. 19-003) with CLEANING AGENTS (Material No. 11-026) to remove dirt and/or grease from the applicable actuator. (2) Make sure that the actuator is clean and in the correct condition. 4. Procedure _________ (Ref. Fig. A613/TASK 28-00-00-991-125) Subtask 28-00-00-220-053 A. Dimensional Check (1) Use a vernier calliper to check the dimension X from the mounting flange face of the actuator to the dowel: (a) If the dimension X is more than 1.08 mm (0.0425 in.), the actuator is unserviceable and must be rejected. (b) If the dimension X is 1.08 mm (0.0425 in.) or less, the actuator is serviceable. Fig. A613

EFF : CES

ALL

28-00-00

Page B613 May 01/05


飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 19_部分2.pdf