TASK 29-22-53-400-010 Installation of the Ejection Jack (1GE) _______ WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE. _______ WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM. _______ WARNING : MAKE SURE THAT THE RAT TRAVEL RANGE IS CLEAR BEFORE YOU EXTEND/RETRACT THE RAT. _______ WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING GEAR. 1. Reason for the Job __________________ Self Explanatory 2. Job Set-up Information ______________________ A. Fixtures, Tools, Test and Support Equipment ------------------------------------------------------------------------------REFERENCE QTY DESIGNATION ------------------------------------------------------------------------------No No No No No specific specific specific specific specific blanking caps container safety barrier warning notices Torque Wrench : range 0.20 to 3.60 m.daN (2.00 to 26.00 lbf.ft) Torque Wrench : range 1.00 to 10.00 m.daN (8.00 to 75.00 lbf.ft)
No specific
R
EFF : 062-099, 106-149, 151-199, 204-299, 301-399, 401-499, CES
29-22-53 Aug 01/05 Page 419 Config-1
飞行翻译公司 www.aviation.cn 本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 20_部分8.pdf
No specific
R
EFF : 062-099, 106-149, 151-199, 204-299, 301-399, 401-499, CES
29-22-53 Aug 01/05 Page 419 Config-1
飞行翻译公司 www.aviation.cn 本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 20_部分8.pdf
自定义标签： 
