A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 23_部分6.pdf500页

(c) Flush the applicable shim(s) with cold water. _______ WARNING : USE A PROTECTIVE EYE SHIELD/GOGGLES WHEN YOU USE COMPRESSED AIR. DEBRIS AND/OR HIGH PRESSURE AIR CAN DAMAGE YOUR EYES. _______ WARNING : DO NOT PUT COMPRESSED GAS IN CONTACT WITH YOUR SKIN. THE GAS CAN GO THROUGH THE SKIN AND MAKE BUBBLES IN THE BLOOD. THIS CONDITION CAN KILL YOU. (d) Flush the applicable shim(s) with hot water then dry using compressed air. Subtask 32-31-73-410-063 R R R E. Installation of the NLG Extension/Steering Proximity Sensors 24GA (25GA) After Adjustment (Ref. Fig. 512/TASK 32-31-73-991-025) _______ WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. R R ____ NOTE : You can install a sensor target without a spacer/shim if the correct clearance can be set without the spacer/shim. (1) For System 1 (24GA), if the dimension X was adjusted: (a) Use a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to clean the mating faces of: - the sensor mounting bracket (51) - the bracket (66). ____ NOTE : If the shim is to be installed, make sure that it is installed in the correct position. (b) Apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-001) to both sides of the shim (65). (c) If applicable, put the shim (65) in position on the bracket (66).

EFF : CES

ALL

32-31-73

Page 595 May 01/04


飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 飞机维护手册 AMM Aircraft Maintenance Manual 23_部分6.pdf