A319 A320 A321 排故手册 TSM Trouble Shooting Manual 10_部分3.pdf300页

3. Fault Confirmation __________________ A. Test (1) Trouble shoot any LGCIU faults (Ref. TASK 32-31-00-810-802) before you continue this procedure (Ref. Chap. 32 Page block 101) (2) Do an operational test of the failure detection sensor for the flap attachment (Ref. AMM TASK 27-51-00-710-002). 4. Fault Isolation _______________ A. Procedure (1) If there is a proximity sensor misadjustment failure : (a) Refer to the (Ref. AMM TASK 27-51-44-000-002) and (Ref. AMM TASK 27-51-44-400-002), use the removal and installation procedures to do the proximity sensor adjustment. (b) Get access to the SYSTEM REPORT/TEST (Ref. AMM TASK 31-32-00-860006). (c) Make sure that the SYSTEM STATUS shows NO FAULTS. (2) If the fault continues: (a) Replace the applicable proximity sensor - SENSOR-L FLAP ATTACHMENT FAILURE DETECTION - SENSOR-R FLAP ATTACHMENT FAILURE DETECTION - SENSOR-L FLAP ATTACHMENT FAILURE DETECTION - SENSOR-R FLAP ATTACHMENT FAILURE DETECTION - (Ref. AMM TASK 27-51-44-000-002) and (Ref. 400-002) (b) Repeat the test in Para. 3.A.(2). (3) If the fault continues do the applicable task for an invalid proximity sensor (Ref. TASK 27-51-00-810-817) or (Ref. TASK 27-51-00810-821). (a) Repeat the test in Para. 3.A.(2), and make sure that the SYSTEM STATUS shows NO FAULTS. 5. Close-up ________ A. Remove the ground support and maintenance equipment, the special and standard tools and all other items. B. Put the aircraft back to its initial configuration. (37CV) (38CV) (39CV) (40CV) AMM TASK 27-51-44-

EFF : R CES

ALL

∞ 27-51-00∞∞ ∞ ∞ ∞ May 01/04 ∞ Page 265


飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 排故手册 TSM Trouble Shooting Manual 10_部分3.pdf