TASK 27-93-00-810-918 Loss of the Pitch Change Over Signal by the SEC2 1. Possible Causes _______________ SEC-2 (1CE2) SEC-1 (1CE1) wiring of the wiring of the wiring of the wiring of the wiring of the wiring of the
PITCH NOT AVAIL IN ELAC2 PITCH NOT AVAIL IN ELAC1 L ELEV NOT AVAIL IN SEC1 R ELEV NOT AVAIL IN SEC1 L ELEV NOT AVAIL IN SEC2 R ELEV NOT AVAIL IN SEC2
(DSI10 and DSI26) (DSI11 and DSI22) (DSI13 and DSI27) (DSI15 and DSI23) (DSI05) signal (DSI06) signal
signals signals signals signals
2. Job Set-up Information ______________________ A. Referenced Information ------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------31-32-00-810-932 AMM 27-94-34-000-001 AMM 27-94-34-400-001 AMM 27-96-00-740-001 ASM 27-92/32 ASM 27-92/33 ASM 27-92/34 ASM 27-92/35 3. Fault Confirmation __________________ A. Test (1) Do the BITE test of the EFCS (ground scanning) (Ref. AMM TASK 27-9600-740-001). 4. Fault Isolation _______________ A. If the BITE test gives the maintenance message CHECK PITCH CHANGE OVER OF SEC2: - replace the SEC-2 (1CE2) (Ref. AMM TASK 27-94-34-000-001) and (Ref. AMM TASK 27-94-34-400-001). (1) If the fault continues: (a) replace the SEC-1 (1CE1) (Ref. AMM TASK 27-94-34-000-001) (Ref. AMM TASK 27-94-34-400-001). Failure of the Discrete Links Removal of the SEC (1CE1,1CE2,1CE3) Installation of the SEC (1CE1,1CE2,1CE3) BITE Test of the EFCS (Ground Scanning)
EFF : R CES
ALL
∞ 27-93-00∞∞ ∞ ∞ ∞ Page01/04 ∞ B243 Aug
飞行翻译公司 www.aviation.cn 本文链接地址：A319 A320 A321 排故手册 TSM Trouble Shooting Manual 10_部分5.pdf
PITCH NOT AVAIL IN ELAC2 PITCH NOT AVAIL IN ELAC1 L ELEV NOT AVAIL IN SEC1 R ELEV NOT AVAIL IN SEC1 L ELEV NOT AVAIL IN SEC2 R ELEV NOT AVAIL IN SEC2
(DSI10 and DSI26) (DSI11 and DSI22) (DSI13 and DSI27) (DSI15 and DSI23) (DSI05) signal (DSI06) signal
signals signals signals signals
2. Job Set-up Information ______________________ A. Referenced Information ------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------31-32-00-810-932 AMM 27-94-34-000-001 AMM 27-94-34-400-001 AMM 27-96-00-740-001 ASM 27-92/32 ASM 27-92/33 ASM 27-92/34 ASM 27-92/35 3. Fault Confirmation __________________ A. Test (1) Do the BITE test of the EFCS (ground scanning) (Ref. AMM TASK 27-9600-740-001). 4. Fault Isolation _______________ A. If the BITE test gives the maintenance message CHECK PITCH CHANGE OVER OF SEC2: - replace the SEC-2 (1CE2) (Ref. AMM TASK 27-94-34-000-001) and (Ref. AMM TASK 27-94-34-400-001). (1) If the fault continues: (a) replace the SEC-1 (1CE1) (Ref. AMM TASK 27-94-34-000-001) (Ref. AMM TASK 27-94-34-400-001). Failure of the Discrete Links Removal of the SEC (1CE1,1CE2,1CE3) Installation of the SEC (1CE1,1CE2,1CE3) BITE Test of the EFCS (Ground Scanning)
EFF : R CES
ALL
∞ 27-93-00∞∞ ∞ ∞ ∞ Page01/04 ∞ B243 Aug
飞行翻译公司 www.aviation.cn 本文链接地址：A319 A320 A321 排故手册 TSM Trouble Shooting Manual 10_部分5.pdf
自定义标签： 
