A319 A320 A321 排故手册 TSM Trouble Shooting Manual 19_部分2.pdf187页

TASK 36-11-00-810-917 Loss of the BMC 1 and Overpressure or Overtemperature on the Engine 1 Bleed System Detected by the BMC 2 1. Possible Causes _______________ - BMC-1 (1HA1) 2. Job Set-up Information ______________________ A. Referenced Information ------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------36-11-00-810-803 36-11-00-810-807 AMM AMM AMM 36-11-00-740-001 36-11-34-000-001 36-11-34-400-001 Fan Air Valve of the Engine 1 Blocked in the Closed Position Bleed Pressure-Regulator Valve of the Engine 1 Blocked in the Open Position or Regulation Failure BITE Test of the BMC 1(2) Removal of the BMC (1HA1, 1HA2) Installation of the BMC (1HA1, 1HA2)

3. Fault Confirmation __________________ A. Test (1) Not applicable. 4. Fault Isolation _______________ A. If there is no related maintenance message: ____ NOTE : This fault symptom comes into view when there is a possible BMC 1 fault plus an overpressure or an overtemperature on the engine 1 bleed system. - do the BITE test of the BMC 1 (Ref. AMM TASK 36-11-00-740-001). (1) If the test is not OK: - replace the BMC-1 (1HA1) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001) - do the trouble shooting procedure for an overpressure (Ref. TASK 36-11-00-810-807) - do the trouble shooting procedure for an overtemperature (Ref. TASK 36-11-00-810-803).

EFF : R CES

ALL

∞ 36-11-00∞∞ ∞ ∞ ∞ Page01/05 ∞ A298 Feb


飞行翻译公司 www.aviation.cn
本文链接地址：A319 A320 A321 排故手册 TSM Trouble Shooting Manual 19_部分2.pdf