TM 1-1520-248-10 8. IDM switch Press to return to IDM Index page. ARTY REQ key Press.
ROUNDS - # N/G
AIR MISSION ROUNDS ENTRY PAGE
9.
10. PPLN LIST key Press. 11. P1 or P2 Press NEW as desired. 12. L-2 Press on Preplan Insertion pages. 13. Repeat steps 1 through 12 to insert a second preplanned mission. NOTE If the PPLN mission is requested as M1, it can only be stored as P1.
RAPID VSD HSD MMS COMM
C O N T
PULL BKUP
B R T
PULL MAN
AIR MISSION SUMMARY
4-139. NEW ARTILLERY FIRE MISSION REQUEST.
To initiate a new fire mission, proceed as follows: 1. Target locate steps Accomplish as required. IDM switch Press as required to display IDM Index page. ARTY REQ key Press. NEW key opposite mission (M1 or M2) to be replaced Press. Mission type Press applicable key and enter required parameters on subsequent pages until all data is inserted. Review mission on Summary page and make changes as required. SEND key Press. NOTE
PULL BKUP
DEST - ?? ??:1 RQST RQSTD
XMT? 1SGL LOA/D N/G-TGT 105SFQ12345678
2.
RAPID VSD HSD MMS
SEND COMM
C O N T
3. 4.
B R T
PULL MAN
AIR MISSION SUMMARY PAGE
5.
DESTINATION MISSION CMD
TGT NO/TYPE
XMT FIRE CONTROL TGT TYPE
6.
ACFT/ TGT ANGLE
MISSION STATUS SEPARATION ANGLE OR TIME ON TGT RAPID VSD HSD
7.
OWN RNG/BRG TO TGT SEND MMS COMM
C O N T
• •
New Artillery Fire Mission Request (simplified) is depicted in fig. 4-80. A generic Artillery Mission Summary page is shown in fig. 4-81.
PULL BKUP
B R T
PULL MAN
406530-47-3 J0855
Figure 4-79. Air Mission Summary Pages
4-159
飞行翻译公司 www.aviation.cn
本文链接地址:OH-58D直升机技术及操作手册4
ROUNDS - # N/G
AIR MISSION ROUNDS ENTRY PAGE
9.
10. PPLN LIST key Press. 11. P1 or P2 Press NEW as desired. 12. L-2 Press on Preplan Insertion pages. 13. Repeat steps 1 through 12 to insert a second preplanned mission. NOTE If the PPLN mission is requested as M1, it can only be stored as P1.
RAPID VSD HSD MMS COMM
C O N T
PULL BKUP
B R T
PULL MAN
AIR MISSION SUMMARY
4-139. NEW ARTILLERY FIRE MISSION REQUEST.
To initiate a new fire mission, proceed as follows: 1. Target locate steps Accomplish as required. IDM switch Press as required to display IDM Index page. ARTY REQ key Press. NEW key opposite mission (M1 or M2) to be replaced Press. Mission type Press applicable key and enter required parameters on subsequent pages until all data is inserted. Review mission on Summary page and make changes as required. SEND key Press. NOTE
PULL BKUP
DEST - ?? ??:1 RQST RQSTD
XMT? 1SGL LOA/D N/G-TGT 105SFQ12345678
2.
RAPID VSD HSD MMS
SEND COMM
C O N T
3. 4.
B R T
PULL MAN
AIR MISSION SUMMARY PAGE
5.
DESTINATION MISSION CMD
TGT NO/TYPE
XMT FIRE CONTROL TGT TYPE
6.
ACFT/ TGT ANGLE
MISSION STATUS SEPARATION ANGLE OR TIME ON TGT RAPID VSD HSD
7.
OWN RNG/BRG TO TGT SEND MMS COMM
C O N T
• •
New Artillery Fire Mission Request (simplified) is depicted in fig. 4-80. A generic Artillery Mission Summary page is shown in fig. 4-81.
PULL BKUP
B R T
PULL MAN
406530-47-3 J0855
Figure 4-79. Air Mission Summary Pages
4-159
飞行翻译公司 www.aviation.cn
本文链接地址:OH-58D直升机技术及操作手册4