Cirrus Design SR22
Section 9 Supplements
is set. As the airplane approaches within approximately 50 feet of the decision height, the alert will sound and the DH light will flash. As the airplane passes through approximately 50 feet beyond the decision height, the alert will sound and the light will flash again. • Note • Pressing the DH button again will disable the DH function causing the DH annunciation to go out. Repeated activation of the DH button alternately activates and deactivates the DH mode. Set Altitude Alert (ALR) 1. Press altitude selector ALR button to arm alert mode. The ALR annunciator will come on. Upon entering within 1000 feet of the altitude selected in ALT SEL, the altitude alert chime will sound in the cabin speaker and headphones and the ALR annunciator will flash. The chime will sound and the ALR annunciator will flash again as the airplane approaches within 300 feet of the selected altitude. If the airplane’s altitude deviates ± 300 feet from the selected altitude, the chime will sound and the ALR annunciator will flash to indicate the condition. 2. To disable ALR, press the altitude selector ALR button again. The ALR annunciator will go out. GPS Tracking and GPS Approach 1. Begin with a reliable GPS signal selected on the NAV receiver. 2. Select desired course on HSI and establish a desired intercept heading. 3. Press the NAV button on the autopilot programmer/computer twice. The NAV and GPSS mode annunciators will illuminate. • Note • If the course needle is at full-scale deviation, the autopilot will establish the airplane on a heading for a 45° intercept with the selected course. As the airplane approaches the course, the autopilot will smoothly shallow the intercept angle. The pilot may select an intercept angle less than the standard 45° by setting the desired intercept heading with the HSI HDG bug, pressing and holding HDG, and then pressing NAV once to
P/N 13772-108 Revision 4: 07-18-05
15 of 24
飞行翻译公司 www.aviation.cn 本文链接地址：西瑞22飞机信息手册 AIRPLANE INFORMATION MANUAL for the CIRRUS DESIGN SR22_split_7.pdf
Section 9 Supplements
is set. As the airplane approaches within approximately 50 feet of the decision height, the alert will sound and the DH light will flash. As the airplane passes through approximately 50 feet beyond the decision height, the alert will sound and the light will flash again. • Note • Pressing the DH button again will disable the DH function causing the DH annunciation to go out. Repeated activation of the DH button alternately activates and deactivates the DH mode. Set Altitude Alert (ALR) 1. Press altitude selector ALR button to arm alert mode. The ALR annunciator will come on. Upon entering within 1000 feet of the altitude selected in ALT SEL, the altitude alert chime will sound in the cabin speaker and headphones and the ALR annunciator will flash. The chime will sound and the ALR annunciator will flash again as the airplane approaches within 300 feet of the selected altitude. If the airplane’s altitude deviates ± 300 feet from the selected altitude, the chime will sound and the ALR annunciator will flash to indicate the condition. 2. To disable ALR, press the altitude selector ALR button again. The ALR annunciator will go out. GPS Tracking and GPS Approach 1. Begin with a reliable GPS signal selected on the NAV receiver. 2. Select desired course on HSI and establish a desired intercept heading. 3. Press the NAV button on the autopilot programmer/computer twice. The NAV and GPSS mode annunciators will illuminate. • Note • If the course needle is at full-scale deviation, the autopilot will establish the airplane on a heading for a 45° intercept with the selected course. As the airplane approaches the course, the autopilot will smoothly shallow the intercept angle. The pilot may select an intercept angle less than the standard 45° by setting the desired intercept heading with the HSI HDG bug, pressing and holding HDG, and then pressing NAV once to
P/N 13772-108 Revision 4: 07-18-05
15 of 24
飞行翻译公司 www.aviation.cn 本文链接地址：西瑞22飞机信息手册 AIRPLANE INFORMATION MANUAL for the CIRRUS DESIGN SR22_split_7.pdf
自定义标签： 
