ROPAT
Approach to Stall – Clean
Sep 13/2004 REV 1
CL300_SOP_011
Volume 1 09-15-04
Recovery • Adjust pitch attitude to maintain altitude as airspeed increases • Adjust airspeed to 180 kt or as directed
Flaps 0
Before entry • Flaps 0 • Altitude 12,000 to 15,000 ft
Use trim to relieve At first indication of stall, simultaneously: pressures to 1.23 VS • Reduce angle of attack • Thrust lever to takeoff power (ref speed) • Level wings and accelerate out of stall
Approach to Stall – Clean (Flaps 0) Figure 09-15-02
Flight Crew Operating Manual CSP 100-6
Entry • Reduce power to idle • Maintain altitude as speed decreases
飞行翻译公司 www.aviation.cn 本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier_Challenger_Global_00-Approach_to_Stall.pdf
Approach to Stall – Clean
Sep 13/2004 REV 1
CL300_SOP_011
Volume 1 09-15-04
Recovery • Adjust pitch attitude to maintain altitude as airspeed increases • Adjust airspeed to 180 kt or as directed
Flaps 0
Before entry • Flaps 0 • Altitude 12,000 to 15,000 ft
Use trim to relieve At first indication of stall, simultaneously: pressures to 1.23 VS • Reduce angle of attack • Thrust lever to takeoff power (ref speed) • Level wings and accelerate out of stall
Approach to Stall – Clean (Flaps 0) Figure 09-15-02
Flight Crew Operating Manual CSP 100-6
Entry • Reduce power to idle • Maintain altitude as speed decreases
飞行翻译公司 www.aviation.cn 本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier_Challenger_Global_00-Approach_to_Stall.pdf
自定义标签： 
